PAC1933T-I/J6CX Overview

Buck boost converter is embedded in the Tape & Reel (TR) package.16-WFBGA, WLCSP has packaged voltage regulator in this manner.This electronic part is mounted in the way of Surface Mount.There should be no temperature above -40°C~85°C TA at the time of operation.An input voltage wcurrent regulatorh a value of 2.7V~5.5V may be used as an input voltage.In the case of 16 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.Among the PAC1933 family of products.Providing that it is powered by a 3.3VV power supply, the constant current should work without any problems.POWER SUPPLY SUPPORT CIRCUIT is the analog IC in this power converter.Compared to the last few years, the number of channels has grown strong/weak: 3.A higher voltage (Vsup) is required for the supply than the voltage 2.7V.It reaches 0.675mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.When the maximum supply voltage (Vsup) applied for its operation reaches 5.5V, the boost converter is considered to be operational.

PAC1933T-I/J6CX Features

Tape & Reel (TR) package
PAC1933 family

PAC1933T-I/J6CX Applications

There are a lot of Microchip Technology PAC1933T-I/J6CX Current Regulation/Managements applications.

• Over current monitor
• Automotive current measurement
• Over-current protection
• Over current monitor
• Current sensing
• Programmable current source
• Over-current measurement
• Battery management
• Motor controls
• Suspension controls