A 18-DIP (0.300, 7.62mm) package is included. In total, it has 13 inputs and outputs. This Microcontroller is mounted using the Through Hole mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is OTP. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 16C series components belong to this electrical component. Its program memory size is 1.75KB 1K x 14. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 18 terminations in total. The part works on a 8-bit basis. An output voltage of 5V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 1.8kB memory size belongs to the part. PIC16C711 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 4MHz, as long as it is operated at a low power consumption. In order for the device to work with the motor, it utilizes the PWM channel NO. On the chip, there are 18 pins that are accessible. A total of 1 timers/counters are included in the package. A total of 18 pins are present. Devices based on the PIC series of CPUs are embedded in the device. There's built-in OTP memory in the equipment. It is built on a PIC core architecture. This 8 Programmable I/O section allows you to program the device in many different ways depending on what you need. The device has 0 UART channels. In total, there are 4 channels for the ADC on this board. The Microcontroller has 1 A/D converters. 8 bits are found on a chip. Devices like this use an 0-channel PWM controller.
PIC16C711-04I/P Features
18-DIP (0.300, 7.62mm) package Mounting type of Through Hole Minimum temperature of -40 °C
PIC16C711-04I/P Applications
There are a lot of Microchip Technology PIC16C711-04I/P Microcontroller applications.