A 20-DIP (0.300, 7.62mm) package is included. In total, it has 18 inputs and outputs. This Microcontroller is mounted using the Through Hole mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is FLASH. The temperature range of this Microcontroller is within the range of -40°C~125°C TA. PIC® XLP™ 16F series components belong to this electrical component. Its program memory size is 14KB 8K x 14. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 20 terminations in total. The part works on a 8-bit basis. An output voltage of 3V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 14kB memory size belongs to the part. PIC16F1619 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 32(MHz), as long as it is operated at a low power consumption. On the chip, there are 20 pins that are accessible. A total of 5 timers/counters are included in the package. A total of 20 pins are present. There's built-in FLASH memory in the equipment. It is built on a PIC core architecture. This 8 Programmable I/O section allows you to program the device in many different ways depending on what you need. The device has 1 UART channels. In total, there are 8 channels for the ADC on this board. A total of 2 PWM channels are used by the device. Devices like this use an 1-channel PWM controller. There are 1 serial I/Os on the IC part. MCU chip is included in the part that 1 external interrupts are available.
PIC16F1619-E/P Features
20-DIP (0.300, 7.62mm) package Mounting type of Through Hole Minimum temperature of -40 °C
PIC16F1619-E/P Applications
There are a lot of Microchip Technology PIC16F1619-E/P Microcontroller applications.