PL502-38OC-R Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be Crystal. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 800MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with LVPECL logic levels. You can find related electrical components to the base part number PL502. It is possible to connect to the PLL via 16 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. This clock PLL features TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TR for better clock signal output. Its steady structure and advanced building process result in a RF synthesizer with a maximum clock rate of 800MHz. There are times when this electronic frequency generator runs at its lowest possible frequency; But don't panic; Just follow the datasheets.

PL502-38OC-R Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

PL502-38OC-R Applications

There are a lot of Microchip Technology
PL502-38OC-R Clock Generators applications.

• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange