PL585-P8-078OC Overview

Clock ICs are packaged using the Tube method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Crystal is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 266.67MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 2.97V~3.63V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS, LVDS, LVPECL logic that can be used with this clock generator. The related electrical components for the base part number PL585 can be found below. A 16 pin is available on the clock PLL. With its steady structure and advanced building process, this RF synthesizer can run at up to 266.67MHz MH266.67MHz. There may be times when you notice that the electronic frequency generator is running at its lowest possible frequency; Do not panic; Just follow the datasheet.

PL585-P8-078OC Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V

PL585-P8-078OC Applications

There are a lot of Microchip Technology
PL585-P8-078OC Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel