PL585-P8-088OC-R Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from Crystal, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 337.5MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. It's compatible with LVCMOS, LVDS, LVPECL logic levels. The related electronic parts of part number PL585 are listed below. The frequency synthesizer has 16 pins that are available. TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TR is included in this frequency generator to enhance clock signal output. With an advanced manufacturing process and steady structure, this clock generator can generate 337.5MHz clocks per second. This analog clock generator may occasionally run at its lowest possible frequency, but don't worry; Just follow the datasheet instructions.

PL585-P8-088OC-R Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V

PL585-P8-088OC-R Applications

There are a lot of Microchip Technology PL585-P8-088OC-R Clock Generators applications.

• Wireless handsets
• Clock synchronization
• Bit synchronization
• High-frequency induction heating
• Microwave point-to-point systems
• Local oscillator source in receiver
• Radar
• Vector network analyzers (VNA)
• GPS systems
• Mechanical devices