8 Terminals 7.6V~30V 8-Pin DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 1Hz~500kHz Transistor Driver
SOT-23
SG1845Y-883B Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
8-CDIP (0.300, 7.62mm)
Number of Pins
8
Operating Temperature
-55°C~125°C TA
Packaging
Tube
Series
Military, MIL-STD-883B
JESD-609 Code
e0
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn/Pb)
Subcategory
Switching Regulator or Controllers
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Pitch
2.54mm
Function
Step-Up/Step-Down
Number of Outputs
1
Output Type
Transistor Driver
Operating Supply Voltage
30V
Input Voltage-Nom
15V
Analog IC - Other Type
SWITCHING CONTROLLER
Output Configuration
Positive, Isolation Capable
Output Current
200mA
Voltage - Supply (Vcc/Vdd)
7.6V~30V
Topology
Flyback
Control Mode
CURRENT-MODE
Frequency - Switching
1Hz~500kHz
Input Voltage (Max)
25V
Control Technique
PULSE WIDTH MODULATION
Rise Time
50ns
Synchronous Rectifier
Yes
Fall Time (Typ)
50 ns
Switcher Configuration
SINGLE
Max Duty Cycle
50 %
Duty Cycle (Max)
48%
Clock Sync
No
Length
9.905mm
Width
7.62mm
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$469.695597
$469.695597
10
$443.109054
$4431.09054
100
$418.027410
$41802.741
500
$394.365481
$197182.7405
1000
$372.042906
$372042.906
SG1845Y-883B Product Details
SG1845Y-883B Overview
It comes in a 8-CDIP (0.300, 7.62mm) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. A 7.6V~30V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -55°C~125°C TA is the -55°C~125°C TArm. It can switch at 1Hz~500kHz. The Through Hole value makes it suitable for general dc dc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Total pins of switching converter are 8. In particular, switching converter is a type of Switching Regulator or Controllers. A maximum voltage of 25V is accepted by the dc to dc regulator as an input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Through Hole. To run the voltage regulator dc to dc safely and reliably, users should apply 30V to the voltage regulator dc to dc. It belongs to the dc to dc voltage regulator series Military, MIL-STD-883B.