SG2526BN Overview

Capsuled in the 18-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 2 outputs. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 8V~35V. Qualified to work in a -25°C~85°C TA dc switcher. This switching controller can switch at 1Hz~500kHz. Through Hole makes it suitable for general dc dc regulator. The dcdc regulator features Dead Time Control, Enable, Frequency Control, Reset, Soft Start for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. 18 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "SG*526". Switching converter has a total of 18 pins. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 8V. It should be fully noted that the dc to dc regulator only accepts 35V input voltage at most. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 49 %. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sThe switching controller works at a frequency of 500kHz. The dc switching utilizes 18mA when it is in a dormant state.

SG2526BN Features

Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz

SG2526BN Applications

There are a lot of Microchip Technology
SG2526BN DC to DC converter applications.

• CNC system
• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments