SST25 Memory IC SST25 Series SST25PF040B 5.275mm mm
SOT-23
SST25PF040B-80-4C-S2AE-T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.209, 5.30mm Width)
Surface Mount
YES
Number of Pins
8
Operating Temperature
0°C~70°C TA
Packaging
Tape & Reel (TR)
Published
2006
Series
SST25
JESD-609 Code
e3
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Terminal Finish
Matte Tin (Sn)
Technology
CMOS
Voltage - Supply
2.3V~3.6V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Terminal Pitch
1.27mm
Reach Compliance Code
unknown
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
SST25PF040B
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
2.3V
Interface
SPI, Serial
Memory Size
4Mb 512K x 8
Memory Type
Non-Volatile
Operating Mode
SYNCHRONOUS
Clock Frequency
80MHz
Memory Format
FLASH
Memory Interface
SPI
Data Bus Width
8b
Organization
4MX1
Memory Width
1
Write Cycle Time - Word, Page
10μs
Memory Density
4194304 bit
Screening Level
TS 16949
Programming Voltage
2.7V
Height Seated (Max)
2.16mm
Length
5.275mm
RoHS Status
ROHS3 Compliant
SST25PF040B-80-4C-S2AE-T Product Details
SST25PF040B-80-4C-S2AE-T Overview
As far as its memory type goes, it falls into the Non-Volatile category. Tape & Reel (TR)-cases are available. An embedded 8-SOIC (0.209, 5.30mm Width) case surrounds memory ics. It is estimated that the memory size on the chip is 4Mb 512K x 8. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. A wide operating temperature range makes this device ideal for a variety of demanding applications. The device is capable of handling a supply voltage of 2.3V~3.6V. There is a recommended mounting type of Surface Mount for it. 8 terminations are planted on the chip. The part supports at least 1 functions to ensure a comprehensive working process. During the rotation of the clock, the ic memory chip is set as 80MHz. In order to select similar parts, typical manufacturers refer to SST25PF040B as the device's base part number. An 8-pin package is used to package this memory device. SST25 series memory devices play an important role in the applications they target. The programming voltage required for certain nonvolatile memory arrays is 2.7V.