SST26WF064C-104I/MF

join

new-10%

Manufacturer part number:SST26WF064C-104I/MF

Manufacturer:Microchip Technology

Description:SST26 SQI? Memory IC SST26 SQI? Series 6mm mm

Case Package:SOT-23

Datasheet:SST26WF064C-104I/MF Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mounting Type	Surface Mount
Package / Case	8-WDFN Exposed Pad
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Series	SST26 SQI®
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Matte Tin (Sn) - annealed
Technology	CMOS
Voltage - Supply	1.65V~1.95V
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	1.27mm
JESD-30 Code	R-PDSO-N8
Supply Voltage-Max (Vsup)	1.95V
Supply Voltage-Min (Vsup)	1.65V
Memory Size	64Mb 8M x 8
Memory Type	Non-Volatile
Operating Mode	SYNCHRONOUS
Clock Frequency	104MHz
Memory Format	FLASH
Memory Interface	SPI - Quad I/O
Organization	64MX1
Memory Width	1
Write Cycle Time - Word, Page	1.5ms
Memory Density	67108864 bit
Screening Level	TS 16949
Parallel/Serial	SERIAL
Programming Voltage	1.8V
Height Seated (Max)	0.8mm
Length	6mm
Width	5mm
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
1	$2.97000	$2.97
25	$2.85320	$71.33
100	$2.73980	$273.98

SST26WF064C-104I/MF Overview

As far as its memory type goes, it falls into the Non-Volatile category. It comes in a Tube. Embedded in the 8-WDFN Exposed Pad case, memory ics is a single file. A memory chip with a capacity of 64Mb 8M x 8 is used on this device. Memory data is stored in FLASH-format, which is common in mainstream devices. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. A voltage of 1.65V~1.95V can be supplied to memory ics. As far as the mounting type is concerned, Surface Mount is recommended. It is planted on the chip with 8 terminations. There are 1 functions supported by this part as part of the comprehensive working process. In order to power this memory device, 1.8V will be necessary. In the memory, there is a clock frequency rotation that ranges 104MHz. This part is part of the SST26 SQI? series of memory devices, which play a key role in its target applications. A programming voltage of 1.8V is required to alter the state of certain nonvolatile memory arrays.