TC1121COA713 Overview

It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. There are 8 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR CONVERTER ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this harley voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. DC DC switching regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. Surface Mount-mount switching regulator. During switching regulator operation, the operating temperature should remain at 0°C~70°C TA. DC-DC switching regulators reach 10kHz~200kHz switching frequencies. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to -Vin. Voltage regulator has a maximum input voltage of 5.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 5V. Listed under the subcategory of Other Analog ICs is this voltage regulator 12v. DC/DC regulators such as this one belong to the TC1121 family of products. The voltage DC DC switching regulator can produce is -5.5V volts. To operate the voltage regulator 12v, 8 pins are required. The maximum output current reaches 100mA A to meet the switching regulator operation requirements. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 2.4V V is required. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly.

TC1121COA713 Features

1 outputs
Peak reflow temperature (Cel) of 260
8 pins

TC1121COA713 Applications

There are a lot of Microchip Technology TC1121COA713 Voltage Regulators applications.

• Computer monitoring equipment of building
• Balance equipment
• Domestic water pumps
• Photovoltaic power
• Lathes
• Post equipment
• Thermal power
• Computer rooms
• Remotely powered electric motors
• Linear guide