TC1232COE Overview

There are 16 terminals on this power management that allow it to be mounted. Power management is packaged in a Tube way. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.295, 7.50mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. The pins of the power management system count 16. IC management can only work with a supply voltage of 4V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be 0°C~70°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 200μA. You can always use TC1232, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature that PMIC chip can work with is 200μA.

TC1232COE Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4V
200μA operating supply current

TC1232COE Applications

There are a lot of Microchip Technology TC1232COE Voltage Supervisors applications.

• Sensitive sensors
• Satellite navigation
• Utility meter
• FPGA design
• Stable power system
• Medical-specific insulation monitor
• Analog circuit
• Cloud computing
• Electrical fire monitoring system
• Detection of phase sequence