TC1277-10ENBTR Overview

Power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1.8V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 20μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TC1277, which is the base power ics number. In order to operate this power management, it requires 2/5V volts of power.

TC1277-10ENBTR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
20μA operating supply current

TC1277-10ENBTR Applications

There are a lot of Microchip Technology TC1277-10ENBTR Voltage Supervisors applications.

• Military electronics
• Consumer electronics
• WiFi router
• Smartphones
• Multi-voltage system
• Power distribution systems of operating room
• Analog circuit
• Microcontroller system
• Insulation fault location system
• Fire equipment power monitoring system