TC53N2202ECTTR Overview
A total of 5 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 2V supply voltages. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. 5 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.5V. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 4.2μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using TC53N2202, the base power ics number. The maximum supply temperature that PMIC chip can work with is 4.2μA.
TC53N2202ECTTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.5V
4.2μA operating supply current
TC53N2202ECTTR Applications
There are a lot of Microchip Technology TC53N2202ECTTR Voltage Supervisors applications.
- Embedded computing
- Urban rail transit weak current power monitoring
- Power distribution systems of ICU
- Microcontroller system
- Dash board
- Automotive permanent magnet synchronous motors
- Detection of phase sequence
- Electronics installed in the vehicle
- Magnetic resonance imaging
- Fire equipment power monitoring system
