TC54VC4502EMB713 Overview

A total of 3 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-243AA functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.1V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 3. This power management has 4 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is always advisable to use TC54VC4502, the base supervisor number, when searching for similar PMICs from the manufacturer. The IC management has a nominal tolerance of 2% that should be noted when measuring and testing.

TC54VC4502EMB713 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

TC54VC4502EMB713 Applications

There are a lot of Microchip Technology TC54VC4502EMB713 Voltage Supervisors applications.

• Electronics installed in the vehicle
• Utility meter
• Display equipment
• FPGA design
• Leakage protection
• Detection of phase sequence
• DVR
• Power distribution systems of CCU
• Personal computers
• Kitchen appliances