TC54VN2002ECB713 Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2.1V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. To find similar IC managements from the manufacturer, you can always search by TC54VN2002.

TC54VN2002ECB713 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

TC54VN2002ECB713 Applications

There are a lot of Microchip Technology TC54VN2002ECB713 Voltage Supervisors applications.

• Medical-specific insulation monitor
• Stable power system
• Fire equipment power monitoring system
• Refrigeration
• Battery cars
• Efficient information transmission
• Battery cars
• Power distribution systems of infant care room
• Solar power charger
• Unattended substation automation