TC649BEPA Overview

There is a Tubepackage included in the design.Parts are packaged in 8-DIP (0.300, 7.62mm)cases.To mount the part by [0], it is recommended that you do so.In this case, it is appropriate for the component connected to Fan Controller.In this case, the device can supply 3V~5.5V volts.Regarding the operating temperature, it is in the range of -40°C~85°C TA°C.A Brushless DC (BLDC)motor can be classified as a type of motor.A total of 8terminations are available in the part.Drivers controllers is possible to apply voltage at a rate of --to the load.You should run this amplifier at 5V.Through Holeis its recommended mounting method.Maintain the current output of the part at -- volts.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.The TC649part number is used to locate the part.8pins are used in its design.There are 1 outputs available.The driver operates on a supply voltage of 3 V to 5.5 V volts.In this case, 4.4Vis maintained as the output voltage.There is FanSense™ change in the output voltage.This device offers a maximum degree of design flexibility due to its 5mAoutput current.At its maximum operating temperature, the device reaches 85 °C.Ideally, the operating temperature should be higher than -40 °C.200 uAis the supply current used for its operation.A total of 1channels are available.There are a total of 8pins on the part.The device is capable of operating at a maximum supply voltage of 5.5 V.In addition to working at a voltage of 3 V, it is capable of working at high voltages as well.In this case, 30Hzis the maximum frequency that can be achieved.

TC649BEPA Features

Applications : Fan Controller
Load voltage across the chip --
base on TC649 number
designed with 1 outputs
with 8 pins

TC649BEPA Applications

There are a lot of Microchip Technology
TC649BEPA motor drivers applications.

• Commercial office
• Hospitality buildings
• Smart lighting applications
• Automotive applications
• Dome
• Dash
• Footwell lighting
• Indicator
• Telltale lights
• Infotainment backlighting