TCM810MVLB713 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-70, SOT-323 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 12μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to TCM810, the base PMIC number. To operate this power management, you will need at least 5V volts of power.

TCM810MVLB713 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current

TCM810MVLB713 Applications

There are a lot of Microchip Technology TCM810MVLB713 Voltage Supervisors applications.

• Rechargeable batteries
• Battery cars
• Telecommunications equipment
• Data storage applications
• Low voltage/high power - AI, GPU
• FPGA design
• Transformer load monitoring equipment
• Detection of phase sequence
• External alarm
• Power distribution systems of CCU