UCS1003-3-BP Overview

The way of Tray is acceptable for shipping the power management.It is packaged the power management in 20-VFQFN Exposed Pad for convenient transportation.Surface Mount is a universal mounting method for easy adaptation.At USB Dedicated Charging Port (DCP), Power Switch and other applications, this power management is targeted.It is recommended that you set the operating temperature of the power management ic to -40°C~125°C in order to prevent malfunctions.4.5V~5.5V voltage is used for the operation of this power management.Getting more power ic's pin-to-pin solutions can be found by searching UCS1003 .On the power management, you will find 20 terminals.As a ANALOG CIRCUIT analog IC, the instruments designs has received much praise.The power managment ic has 20 pins.This connector has a Surface Mount for mounting it on a PCB or other type of board.The power manager is supplied with 5V voltage and is capable of performing a wide range of demanding tasks.An input voltage of 650μA is required for this power management ic to operate.In order to start up, it needs at least 4.5V .The power supply ic should not be supplied with voltage above 5.5V .There are 2 outputs in total supported by it.A 3A output should be seen from the ic power supply at this time.

UCS1003-3-BP Features

Mainly used in USB Dedicated Charging Port (DCP), Power Switch applications
Operating temperature: -40°C~125°C
ANALOG CIRCUIT analog IC
2 Outputs

UCS1003-3-BP Applications

There are a lot of Microchip Technology UCS1003-3-BPPower Management applications.

• Termination Voltage
• System Thermal for PCs
• Modules With Remote-Sense Capability
• Port/cable dongles
• Telecommunications Equipment
• Field Service
• Motherboard
• DDR-II Termination Voltage
• Desktop PC
• SSTL-2 Termination