There are two packages that contain fpga chips: 80-TQFP package and X package. A total of 69 I/Os are programmed to ensure a more coherent data transfer. In order to construct a fundamental building block, 547 logic elements/cells are required. Using a Surface Mount connector, you can mount this FPGA module on the development board. With a supply voltage of 3V~3.6V 4.75V~5.25V, this device operates with ease. The MX series FPGA is a type of FPGA that belongs to the MX family of FPGAs. As far as the operating temperature is concerned, it should be kept within 0°C~70°C TA when operating. In order to save space, this FPGA model has been contained in Tray. In order to find related parts, you can use its base part number A40MX04. 80 pins are designed into the device. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. When operating with the supply voltage of 5V, designers can fully make use of its flexibility. When this module is operated at its maximum operating temperature, it reaches 70°C. Over 0°C, the operating temperature should be higher. 6000 gates make up the basic block of its construction. 547 logic blocks (LABs) make up its basic building blocks. A total of 273 registers are used for storing and transferring data between them. This device is capable of supporting a maximum supply voltage of 5.25V. As long as the supply voltage is at least 3V, it is able to work properly. Using this FPGA, you can get speeds up to 83MHz. The device package supplied by 80-VQFP (14x14) is one of its suppliers.