The package that contains this software is called 176-LQFP. Fpga chips is programmed wFpga chipsh 104 I/Os for transferring data in a more coherent manner. In order to construct a fundamental building block, 336 logic elements/cells are required. This FPGA module can be attached to the development board with a Surface Mount. There is a 3V~3.6V 4.75V~5.25V-volt supply voltage required for the device to operate. It is a type of FPGA that belongs to the MX series of FPGAs. As far as the operating temperature is concerned, it should be kept within 0°C~70°C TA when operating. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. For related parts, use its base part number A42MX09. In order to make it work, 176 pins have been designed. According to its specifications, this FPGA will be able to work fantastically as long as it is mounted in Surface Mount. When operating with the supply voltage of 5V, designers can fully make use of its flexibility. As far as the maximum operating temperature of this module is concerned, it reaches 70°C. 0°C should be higher than the operating temperature. A basic building block for this type of building block consists of 14000 gates. The basic building block of the system is composed of 336 logic blocks (LABs). The registers used in the transfer of and storage of data are 516 in number. In addfpga semiconductorion, fpga semiconductor is able to support a maximum supply voltage of 5.25V. Using 3V as the minimum supply voltage, fpga semiconductor can operate. Fpga semiconductor is possible for this FPGA to reach speeds of up to 215MHz. The supplier of the device package is 176-TQFP (24x24).