A 208-BFQFP package contains it, and it is available for download. A total of 176 I/Os allow data to be transferred in a more coherent manner. To form a fundamental building block, there are 912 logic elements/cells. By attaching the Surface Mount connector, you can use this FPGA module with your development board. Fpga chips operates at a voltage of 3V~3.6V 4.75V~5.25V and uses a battery to supply power. As part of the MX series of FPGAs, it is a type of FPGA. As far as the operating temperature is concerned, it should be kept within 0°C~70°C TA when operating. As a space-saving measure, this FPGA model is contained within Tray. In order to find related parts, use the part number A42MX24 as a base. It has a total of 208 pins that are designed for it. In my opinion, this FPGA could produce fantastic results if mounted in Surface Mount, provided that its specifications are followed. Design engineers can fully take advantage of its flexibility when operating at 5V supply voltage. As a result of the design of this module, the maximum operating temperature reaches 70°C. In order to achieve 0°C, the operating temperature must be higher than 0°C. The basic building block of this system consists of 36000 gates. There are 912 logic blocks (LABs) that make up the system's basic building block. There are 1410 registers used to store and transfer data. This device is capable of supporting a maximum supply voltage of 5.25V. A minimal supply voltage of 3V is required for it to operate. The supplier of the device package is 208-PQFP (28x28).