There are two packages that contain fpga chips: 144-LQFP package and X package. A total of 113 I/Os are programmed to ensure a more coherent data transfer. Using a Surface Mount connector, you can mount this FPGA module on the development board. A supply voltage of 2.25V~5.25V is needed in order for fpga chips to operate. The SX-A series FPGA is a type of FPGA that belongs to the SX-A family of FPGAs. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~125°C TA at all times. In order to save space, this FPGA model has been contained in Tray. A54SX08A is the base part number that can be used to identify related parts. The device has 144 pins which are included in the design. An array of 768 LABs/CLBs is built into the FPGA. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. Its flexibility is fully utilized when operated with a supply voltage of 2.5V. When this module is operated at its maximum operating temperature, it reaches 125°C. Over -40°C, the operating temperature should be higher. 12000 gates make up the basic block of its construction. 768 logic blocks (LABs) make up its basic building blocks. As a result, there are 512 registers which are used to store and transfer data. It can take a maximum of 2.75V as the supply voltage. The unit is capable of working with a minimum supply voltage of 2.25V. A FPGA of this type can achieve a speed as high as 238MHz. 144-TQFP (20x20) stands for its supplier device package.