A 100-LQFP package contains it, and it is available for download. The I/Os are designed to facilitate a more coherent transfer of data. Using a Surface Mount connector, you can mount this FPGA module on the development board. The supply voltage of the device is 2.25V~5.25V , at which it runs. FPGAs belonging to the SX-A series are a type of FPGA that belong to the SX-A series of FPGAs. Operating temperatures should be maintained within the -40°C~125°C TA range at all times when the unit is in use. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. Parts related to this part can be found using its base part number A54SX16A. The device is designed with 100 pins in total. The FPGA is built as an array of 1452 latches or CLBs. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. In operation with 2.5V, designers can take advantage of its flexibility to the fullest extent. There is a maximum operating temperature of 125°C for this module. -40°C should be higher than the operating temperature. The basic building block of this system consists of 24000 gates. 1452 logic blocks (LABs) constitute its basic building block. The data is stored and transferred using 990 registers that are used for this purpose. This device is capable of supporting a maximum supply voltage of 2.75V. The unit is capable of working with a minimum supply voltage of 2.25V. In fact, this FPGA is capable of reaching a speed of 227MHz. As a supplier, 100-TQFP (14x14) is responsible for the package of its devices.