JANTX1N5289UR-1 Overview

Buck boost converter is part of the package Bulk.A package in the way of DO-213AB, MELF (Glass) is used for voltage regulator.There is a Surface Mount mounted on this current regulator.As a rule of thumb, the operating temperature should not exceed -65°C~175°C.Current regulator is possible to use a voltage of 100V Max as an input voltage.In addition to the 2 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of a signal interface in a computer or other communication constant current regulator, 2 pins are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.The output current of the 430μA feature allows it to be designed in a way that offers maximum design flexibility.It supports the maximal supply voltage of 100V.It is a type of FPGA belonging to the Military, MIL-PRF-19500/463 series.There are a total of 1 elements in current regulation.A further characteristic of constant current regulator is that it possesses METALLURGICALLY BONDED.

JANTX1N5289UR-1 Features

Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements

JANTX1N5289UR-1 Applications

There are a lot of Microsemi Corporation JANTX1N5289UR-1 Current Regulation/Managements applications.

• Suspension controls
• Vehicle dynamic controls
• Engine management
• Transmission controls
• Battery management
• Level translating
• Motor controls
• Automotive current measurement
• Current sensing
• Programmable current source