JANTXV1N5301UR-1 Overview

There is a package called Bulk that contains buck boost converter.Voltage regulator is packaged in the way of DO-213AB, MELF (Glass).Surface Mount is used to mount this current regulator on the board.In order to ensure the correct operation of the system, the temperature should not exceed -65°C~175°C.The input voltage of 100V Max is supported as an input voltage.A 2 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.Computers or other communication constant current regulators have 2 pins, which are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.As a result of 1.4mA's output current, it offers maximum design flexibility.As a result, it allows 100V to be supplied with its maximum voltage.These FPGAs belong to the Military, MIL-PRF-19500/463 series.There are 1 elements in current regulation.As well as being characterized by METALLURGICALLY BONDED, constant current regulator is also characterized.

JANTXV1N5301UR-1 Features

Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements

JANTXV1N5301UR-1 Applications

There are a lot of Microsemi Corporation JANTXV1N5301UR-1 Current Regulation/Managements applications.

• Power management
• Vehicle dynamic controls
• Power supply current measurement
• Engine management
• Level translating
• Over current monitor
• Battery management
• Programmable current source
• Over current monitor
• Over-current protection