MP1494DJ-LF-Z Overview

Using the Cut Tape (CT) package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, there are a total of 8 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The space-saving SOT-23-8 Thin, TSOT-23-8 package is available for this voltage regulator. There are 1 outputs configured on the voltage regulator. The adjusting voltage regulator generates Adjustable output. A Surface Mount mounting is required for this switching regulator. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. A DC-DC switching regulator of this type operates at a switching frequency of 500kHz. This voltage regulator is able to operate with the minimal input voltage of 4.5V. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.8V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 12V is provided. Voltage of voltage regulator can be delivered at 13V volts. The switching regulator operation of the system is controlled by 8 pins. Ideally this switch regulator should have an output voltage of about 800mV at the very least. Accordingly, dc to dc voltage regulator's maximum output current is 2A A. 13V's maximal output voltage allows adjusting voltage regulator to operate easily. The maximum output voltage of this regulator voltage is 13V. An input voltage of 16V is used to operate this harley voltage regulator.

MP1494DJ-LF-Z Features

1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 16V

MP1494DJ-LF-Z Applications

There are a lot of Monolithic Power Systems Inc. MP1494DJ-LF-Z Voltage Regulators applications.

• Laboratories
• Photovoltaic power
• Surface processing equipment
• Alternators
• Printing equipment
• Remotely powered electric motors
• Boring machines
• Linear guide
• Shearing machines
• Plate bending machines