MP2143DJ-LF-Z Overview

It is designed to provide optimal performance by utilizing the Cut Tape (CT) package. There are 8 terminations in this harley voltage regulator. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a SOT-23-8 Thin, TSOT-23-8 package. A total of 1 outputs are configured in this voltage regulator. ICs such as this voltage regulator are capable of generating Adjustable outputs through their output pins. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. This voltage regulator 12v reaches a switching frequency of 1.2MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.5V. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 0.6V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. An input voltage of 5V is required for switching regulator operation. The voltage DC DC switching regulator can provide is up to 5V volts. There are 8 pins used for switching regulator operation. Ideally this switch regulator should have an output voltage of about 600mV at the very least. For switching regulator maximum operation, dc to dc voltage regulator delivers 3A A. DC DC switching regulator is able to operate in an easy way on the basis of the maximal output voltage of 5V. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 5V. 5.5V is the supply voltage for this DC-DC switching regulator.

MP2143DJ-LF-Z Features

1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V

MP2143DJ-LF-Z Applications

There are a lot of Monolithic Power Systems Inc. MP2143DJ-LF-Z Voltage Regulators applications.

• Low output voltage switching power supply circuits
• Sensitive electronic devices
• Milling machines
• CNC system
• Pipe bending machines
• Injection molding machinery
• Flaw detection equipment
• Electric heating, lighting
• Experimental setup
• Balance equipment