MP62171EK-LF-P

join

new-10%

Manufacturer part number:MP62171EK-LF-P

Manufacturer:Monolithic Power Systems Inc.

Description:PMIC 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:MP62171EK-LF-P Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supplier Device Package	8-MSOP
Operating Temperature	-20°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2010
Feature	Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	85°C
Min Operating Temperature	-20°C
Number of Outputs	1
Max Output Current	1.5A
Operating Supply Voltage	5.5V
Interface	On/Off
Current - Output (Max)	1.5A
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Switch Type	General Purpose
Min Input Voltage	2.7V
Max Input Voltage	5.5V
Ratio - Input:Output	1:1
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	75mOhm
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
500	$1.03600	$518

MP62171EK-LF-P Overview

Tape & Reel (TR) is the way it's packaged.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -20°C~85°C TA.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.It is equipped with Status Flag features.From the lighting driver, there is a maximum output of 1.5AV.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.For maximum efficiency, the supply voltage should be set to 5.5V.This LED driver can handle voltages up to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.The maximum operating temperature of 85°C°C allows for stable operation.In order to ensure reliability, it must operate at a minimum temperature of -20°C degrees Celsius.