MP6400DJ-25-LF-Z Overview

It is mounted through 6 terminals on the power management. This power ic is packaged in a way that looks like a Tube. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-6 Thin, TSOT-23-6 functions for your convenience. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.8V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector.

MP6400DJ-25-LF-Z Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V

MP6400DJ-25-LF-Z Applications

There are a lot of Monolithic Power Systems Inc. MP6400DJ-25-LF-Z Voltage Supervisors applications.

• Consumer electronics
• Automotive permanent magnet synchronous motors
• Transformer load monitoring equipment
• Embedded computing
• Network equipment
• Military electronics
• Electronics installed in the vehicle
• Digitally controlled LDO regulators circuit
• Battery cars
• Battery-powered equipment