MP8005DF-LF Overview

It is included in the Tube package.Packaged according to 20-TSSOP (0.173, 4.40mm Width) Exposed Pad.PoE controller type Controller (PD), DC/DC.Channels are growing strong/weak depending on the category: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~85°C.Electricity is supplied to this Po E controller by voltage 0V~57V.An 20 termination involves terminating a transmission line with a power over ethernet controller with a characteristic impedance that matches the line's characteristics.In addition, it is equipped with a 20 pin count.There is a peak reflow temperature of this electric ethernet power controller (Cel) of 260 degrees Celsius.There should be a difference between the supply voltage and 48V in the supply voltage.It reaches 57V when the maximal current (Vsup) supplied to it for its operation reaches its maximum value.In order for 270μA to perform its proper functions, it needs to have a current supply that is adequate.Its operating supply voltage is 48V.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this PoE controller is 1.2Ohm (Ω).

MP8005DF-LF Features

Tube package
20 pin count
1.2Ohm (Ω)

MP8005DF-LF Applications

There are a lot of Monolithic Power Systems Inc. MP8005DF-LF Power Over Ethernet (PoE) Controllers applications.

• IP Phone Power Management
• Lighting
• Multiband access points
• Dual Signature PD/Forced UPOE
• Pass-through System
• IEEE 802.3bt (Draft) Compliant Devices
• Midspan Applications
• High power (>12.95 W) powered devices
• Wireless Access Points
• Single-Port PSE Power Injectors