MP8666DN-LF Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~21V volts and has 4.5V~21V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at 600kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. There are a DUAL terminal on the switching converters. A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. As determined by the test statistics, the output voltage of DC regulator is 3.3V. In most cases, the output current of the dc dc regulator will be 6A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 90 %. Users should apply 21V to operate the voltage regulator dc to dc safely and reliably. The dc switcher's maximum input voltage is 21V, so users must limit the voltage accordingly.

MP8666DN-LF Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %

MP8666DN-LF Applications

There are a lot of Monolithic Power Systems Inc. MP8666DN-LF DC to DC converter applications.

• Balance equipment
• Telecommunications equipment
• Remotely powered electric motors
• Automatic testing equipment
• Large fire protection systems
• Direct power supply system
• Computer application technology
• Flaw detection equipment
• Current source circuits
• Various CNC machine tools