NB670AGQ-Z

join

new-10%

Manufacturer part number:NB670AGQ-Z

Manufacturer:Monolithic Power Systems Inc.

Description:PMIC 16 Pin 16-PowerVQFN

Case Package:SOT-23

Datasheet:NB670AGQ-Z Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerVQFN
Number of Pins	16
Supplier Device Package	16-QFN (3x3)
Weight	57.09594mg
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Voltage - Supply	5V~22V
Number of Outputs	2
Output Voltage	3.3V
Max Output Current	6A
Voltage - Output 1	3.3V
Operating Supply Voltage	24V
Voltage - Output 2	3.3V
Topology	Step-Down (Buck) Synchronous (1), Linear (LDO) (1)
Min Input Voltage	5V
Frequency - Switching	500kHz
Max Input Voltage	24V
w/Sequencer	No
Voltage/Current - Output 1	3.3V 6A
Voltage/Current - Output 2	3.3V 100mA
w/LED Driver	No
w/Supervisor	No
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

Quantity	Unit Price	Ext. Price
1	$5.592270	$5.59227
10	$5.275726	$52.75726
100	$4.977100	$497.71
500	$4.695378	$2347.689
1000	$4.429602	$4429.602

NB670AGQ-Z Overview

16-PowerVQFN packaging is voltage regulators' for voltage regulators' transportation.Ready for shipping in Tape & Reel (TR) package.Voltage regulator supports a total of 2 outputs.In order to prevent malfunctions, it is recommended that the operating temperature be set to -40°C~125°C.16-shaped pins are used in this voltage regulator.This regulator voltage can be used in a wide range of applications due to its 3.3V output voltage.This regulator requires input voltage ≥ 5V.It is possible to use 24V voltage with this voltage regulator.It is designed to produce as much current 6A as possible at its maximum capacity.16-QFN (3x3) includes this harley voltage regulator as part of its package.A Surface Mount-slot is provided for mounting the board on a PCB or other board that requires mounting.The temperature should not be lower than -40°C.Temperature higher than 125°C is not recommended for use.