NJM2901M-TE1 Overview

Output type OPEN-COLLECTOR is used for this comparator.Electronic comparator is possible to find the 14 terminals of the comparator.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.The device contains 14 pins.14 pins are present on the comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 800μA .The compartator could be damaged if the current supply exceeds 2mA .A voltage gain of 106dB can be determined from the voltage formula for the part.Temperatures above 85°C are not recommended.A temperature lower than -40°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 36V .The comparator is capable of operating at a minimum supply voltage of 2V .For the output to be of high quality, 4 channels must cooperate together.A comparator consists essentially of a very high-gain COMPARATOR amplifier.This device is rated for 16mA mA output current.

NJM2901M-TE1 Features

OPEN-COLLECTOR output capability
Voltage Gain: 106dB
COMPARATOR amplifier

NJM2901M-TE1 Applications

There are a lot of New Japan Radio (NJR)
NJM2901M-TE1 linear comparators applications.

• General-Purpose, Low-Voltage Applications
• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring