74AHC273D,112 Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tubecontains it. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. A temperature of -40°C~125°C TAis used in the operation. D-Typedescribes this flip flop. FPGAs belonging to the 74AHCseries contain this type of chip. Its output frequency should not exceed 110MHz Hz. The element count is 1 . Despite external influences, it consumes 4μAof quiescent current. A total of 20terminations have been recorded. If you search by 74AHC273, you will find similar parts. The power supply voltage is 5V. A 3pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the AHCfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. An electronic part with 8bits has been designed. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. For high efficiency, the supply voltage should be kept at 5V. The number of input lines is 8.

74AHC273D,112 Features

Tube package
74AHC series
20 pins
8 Bits

74AHC273D,112 Applications

There are a lot of Nexperia USA Inc. 74AHC273D,112 Flip Flops applications.

• Buffered Clock
• Storage registers
• Balanced Propagation Delays
• Data storage
• Data transfer
• Shift registers
• Frequency Divider circuits
• Storage Registers
• Single Up Count-Control Line
• Load Control