74AHCT1G66GW,165 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 5-TSSOP, SC-70-5, SOT-353. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~125°C TA. In total, 5 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 5 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Use 74AHCT1G66 to search for variants of the digital switches. There is 22Ohm internal resistance in this digital multiplexer. To find out what the 5 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The digital multiplexer has a low cost Single supply. A low voltage of 4.5V should be applied to the electronic component. This multiplexer would work with 1μA current. Using a single voltage supply, this switch device consumes 4.5V~5.5V volts. Putting voltage greater than 75mA on the multiplexer may cause damage. Operating voltages range from 5V. A 1 input needs to be operated.

74AHCT1G66GW,165 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz

74AHCT1G66GW,165 Applications

There are a lot of Nexperia USA Inc. 74AHCT1G66GW,165 Analog Switches & Multiplexers ICs applications.

• SONET
• Battery Powered Systems
• PBXs
• Digital cross connects (DSX-1)
• Fiber to the Home
• PBX interfaces
• Sample hold systems
• Precision test equipment
• Relay replacements
• Communication systems