74HC174DB,112 Overview

In the form of 16-SSOP (0.209, 5.30mm Width), it has been packaged. D flip flop is embedded in the Tube package. As configured, the output uses Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 2V~6V. In this case, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74HC series. There should be no greater frequency than 107MHzon its output. A total of 1elements are present in it. As a result, it consumes 8μA quiescent current. Currently, there are 16 terminations. The 74HC174 family contains this object. A voltage of 5V is used to power it. This JK flip flop has a 3.5pFfarad input capacitance. HC/UHis the family of this D flip flop. It is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. There are 6bits in its design. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. 6input lines are available for you to choose from.

74HC174DB,112 Features

Tube package
74HC series
16 pins
6 Bits

74HC174DB,112 Applications

There are a lot of Nexperia USA Inc. 74HC174DB,112 Flip Flops applications.

• Common Clocks
• Dynamic threshold performance
• Parallel data storage
• Digital electronics systems
• Balanced 24 mA output drivers
• Frequency Dividers
• Divide a clock signal by 2 or 4
• Single Up Count-Control Line
• Bounce elimination switch
• Guaranteed simultaneous switching noise level