74HC251PW-Q100J Overview

Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.Mounting is performed using Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.With the 74HC series, the multiplexers are suitable for a diverse range of applications.There are 16 terminations included in its basic configuration.The base part number is 74HC251, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.In the HC/UH family, the logic switch is included.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Keeping Vsup at 6V will prevent some unnecessary failures.There are 1 outputs designed to operate the turn signal switch.It is possible to accept voltage levels by using one of the 8 input lines of multiplexers.

74HC251PW-Q100J Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
8 input lines

74HC251PW-Q100J Applications

There are a lot of Nexperia USA Inc. 74HC251PW-Q100J Signal Switches / Multiplexers / Decoders applications.

• To select different devices in microprocessor output
• Robotic vehicles
• Memory chips
• Metal detectors
• Electronics industry
• VGA
• Image transmission
• Microprocessor memory systems
• Idle motor
• Home automation system