74HC273PW-Q100J Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. It belongs to the 74HCseries of FPGAs. Its output frequency should not exceed 122MHz Hz. A total of 1 elements are present. It has been determined that there have been 20 terminations. D latch belongs to the 74HC273 family. It is powered from a supply voltage of 5V. Input capacitance of this device is 3.5pF farads. A device of this type belongs to the family of HC/UH. It is mounted in the way of Surface Mount. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. This flip flop is designed with 8 Bits. It reaches the maximum supply voltage (Vsup) at 6V. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 8 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. 8μAquiescent current consumed.

74HC273PW-Q100J Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits

74HC273PW-Q100J Applications

There are a lot of Nexperia USA Inc. 74HC273PW-Q100J Flip Flops applications.

• Balanced Propagation Delays
• CMOS Process
• Instrumentation
• ESD performance
• Divide a clock signal by 2 or 4
• Set-reset capability
• Registers
• Circuit Design
• QML qualified product
• Frequency Divider circuits