74HC373DB,112 Overview

There is an embedded version of it in package 20-SSOP (0.209, 5.30mm Width). Tube is the way in which it is packaged. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. A 2V~6V voltage supply is required for operation. A temperature of -40°C~125°C is set as the operating temperature. The 74HC series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. This device has been designed with 20 terminations available. It belongs to 74HC373 family. In order to operate it, the supply voltage must be 5V. There are 20 pins attached to it. HC/UH is the family name of this electronic device. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. During this period, the maximum supply voltage (Vsup) reaches 6V. (Vsup) should be greater than 2V.

74HC373DB,112 Features

20-SSOP (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count

74HC373DB,112 Applications

There are a lot of Nexperia USA Inc. 74HC373DB,112 Latches applications.

• Relay replacement
• Up/down difference counting
• Decade counting
• Frequency
• Registers
• Shift Registers
• High-speed logic
• Phase comparator
• Parallel-to-Serial Data Conversion
• Accumulator Registers