The electronic part can be shipped overseas conveniently because it is packaged in 16-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SP4T switching circuits. A total of 2 circuits make up this switch device. Search with 74HC4052 if you are looking for analog multiplexer variants. It has an internal resistance of 210Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 320μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. There is a voltage range of 5V operating voltages for the electrical part. The transfer of data can be performed over 180MHz bandwidths.
74HC4052DB,112 Features
8 Channels Switch Circuit: SP4T 320μA Supply Current Bandwidth: 180MHz
74HC4052DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4052DB,112 Analog Switches & Multiplexers ICs applications.