74HCT153PW-Q100J Overview

It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.As a member of 74HCT series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 14 terminations.As its base part number is 74HCT153, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.There are 16 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.In the HCT family, the logic switch is included.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.Avoid unnecessary failures by keeping Vsup at 5.5V.For the turn signal switch's operation, there are 1 outputs.

74HCT153PW-Q100J Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

74HCT153PW-Q100J Applications

There are a lot of Nexperia USA Inc. 74HCT153PW-Q100J Signal Switches / Multiplexers / Decoders applications.

• Injectors
• Make full adder
• Telephone network
• Data distribution
• Recording transmission
• Data communication
• Data collection system
• Analog, digital or video signal switching
• Relay
• Image transmission