74HCT377D,653 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. It should not exceed 53MHzin terms of its output frequency. In total, there are 1 elements. It consumes 8μA of quiescent current without being affected by external factors. A total of 20terminations have been recorded. JK flip flop belongs to 74HCT377 family. The power supply voltage is 5V. Its input capacitance is 3.5pF farads. This D flip flop belongs to the family of HCT. As you can see from the design, it has pins with 20. It reaches the maximum supply voltage (Vsup) at 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. It offers maximum design flexibility with its output current of 25mA. Additionally, you may refer to the additional WITH HOLD MODE of the electronic flip flop.

74HCT377D,653 Features

Tape & Reel (TR) package
74HCT series
20 pins

74HCT377D,653 Applications

There are a lot of Nexperia USA Inc. 74HCT377D,653 Flip Flops applications.

• Synchronous counter
• Buffered Clock
• Computers
• 2 – Bit synchronous counter
• Differential Individual
• Functionally equivalent to the MC10/100EL29
• Convert a momentary switch to a toggle switch
• EMI reduction circuitry
• Patented noise
• Storage registers