74HCT377DB,118 Overview

The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 53MHzin its output frequency. The list contains 1 elements. It has been determined that there have been 20 terminations. It is a member of the 74HCT377 family. Power is supplied from a voltage of 5V volts. A 3.5pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Surface Mountis mounted in the way. There are 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. Optimal efficiency requires a supply voltage of 5V. A total of 8input lines have been provided. As a result, it consumes 8μA of quiescent current without being affected by external factors. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.

74HCT377DB,118 Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits

74HCT377DB,118 Applications

There are a lot of Nexperia USA Inc. 74HCT377DB,118 Flip Flops applications.

• Frequency division
• ATE
• Digital electronics systems
• Modulo – n – counter
• Registers
• Memory
• Event Detectors
• Convert a momentary switch to a toggle switch
• Counters
• Common Clocks