74HCT4066PW,118 Overview

As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. In total, 14 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 14 series that this electronic component is included. A SPST - NO switching circuit is used for these analog switches. Try searching for the analog switch ic with 74HCT4066 if you are looking for variants. The internal resistance of this digital multiplexer is 20Ohm. To find out what the 14 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 4.5V. This multiplexer would work with 40μA current. A voltage of 4.5V~5.5V is required for this switch device, which drains from a single voltage source. 5V operating voltages are supported by the electronic component. The 4 inputs need to be operated in order to work.

74HCT4066PW,118 Features

1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz

74HCT4066PW,118 Applications

There are a lot of Nexperia USA Inc. 74HCT4066PW,118 Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Transmit
• Avionics and Military Systems
• PDH Multiplexers
• Channel Banks
• DSUs
• Industrial control systems
• Data switching
• Automotive applications
• Fiber to the Home