16ns, 28ns SPST - NO 35Ohm DUAL Analog Switches 74LV4066 14 Pins 2μA 3.3V 14-SSOP (0.209, 5.30mm Width)
SOT-23
74LV4066DB,112 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-SSOP (0.209, 5.30mm Width)
Number of Pins
14
Operating Temperature
-40°C~125°C TA
Packaging
Tube
Published
2013
JESD-609 Code
e4
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
Resistance
40Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation
400mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
3.3V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
74LV4066
Pin Count
14
Operating Supply Voltage
3.3V
Number of Channels
1
Max Supply Voltage
6V
Min Supply Voltage
1V
Operating Supply Current
80μA
Power Dissipation
400mW
Max Supply Current
80μA
Throw Configuration
SPST
Turn On Delay Time
40 ns
Number of Inputs
4
Supply Type
Single
Turn-Off Delay Time
50 ns
-3db Bandwidth
200MHz
On-State Resistance (Max)
35Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
50 dB
Current - Leakage (IS(off)) (Max)
2μA
Channel Capacitance (CS(off), CD(off))
3.5pF
On-state Resistance Match-Nom
2Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
16ns, 28ns
Crosstalk
-60dB @ 1MHz
Switch-on Time-Max
30ns
Voltage - Supply, Single (V+)
1V~6V
Height Seated (Max)
2mm
Length
6.2mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
74LV4066DB,112 Product Details
74LV4066DB,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SSOP (0.209, 5.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 14. High-quality output is provided by the electronic component's 1 channels. With a 3.3V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 14 series. Multiplexers built on a SPST - NO switching circuit are built. Try searching with 74LV4066 if you're looking for variants. Internally, this switch multiplexer has a resistance of 40Ohm. For details about the functions of 14 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1V should be applied to the electronic component. For this digital switch to work, 80μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1V~6V. Put voltage above 80μA on the multiplexer to cause damage. 3.3V operating voltages are supported by the electronic component. A 4 input needs to be operated.
74LV4066DB,112 Features
1 Channels Switch Circuit: SPST - NO 80μA Supply Current -3db Bandwidth: 200MHz
74LV4066DB,112 Applications
There are a lot of Nexperia USA Inc. 74LV4066DB,112 Analog Switches & Multiplexers ICs applications.