74LVC2G53DC,125 Overview

As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 8. This electronic part offers high-quality output due to its 2 channels. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. Circuits based on SPDT switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. 74LVC2G53 can be used to search for analog multiplexer variants. A 15Ohm internal resistance characterizes this multiplexer. For details about the functions of 8 pins, please refer to the datasheets. Multiplexers should not be powered above 5.5V in normal situations. Single supply type digital switch with a low cost. There should be 1.65V voltage fed to the electrical part below 1.65V. It would be sufficient to run this analogue multiplexer with 40μA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The transfer of data can be performed over 300MHz bandwidths.

74LVC2G53DC,125 Features

2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz

74LVC2G53DC,125 Applications

There are a lot of Nexperia USA Inc. 74LVC2G53DC,125 Analog Switches & Multiplexers ICs applications.

• Central office
• Fiber to the Home
• Ultrasound
• Medical systems
• Industrial control systems
• Digital access cross connects
• Communication systems
• MP3 players
• Intelligent PBX
• Audio and video signal routing