74HCT534N,652 Overview

The package is in the form of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~125°C TAis used in the operation. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 40MHz. In total, there are 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HCT534. Power is provided by a 5V supply. Input capacitance of this device is 3.5pF farads. This D flip flop belongs to the family of HCT. This part is included in FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. The D latch operates on 5V volts. The D flip flop is embedded with 2ports.

74HCT534N,652 Features

Tube package
74HCT series
5V power supplies

74HCT534N,652 Applications

There are a lot of NXP USA Inc. 74HCT534N,652 Flip Flops applications.

• Load Control
• ESCC
• Asynchronous counter
• Counters
• Count Modes
• Matched Rise and Fall
• Frequency division
• Differential Individual
• Clock pulse
• Instrumentation