74HCT7273N,112 Overview

The item is packaged in 20-DIP (0.300, 7.62mm)cases. It is contained within the Tubepackage. In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. Through Holeis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~125°C TA. D-Typedescribes this flip flop. The 74HCTseries comprises this type of FPGA. Its output frequency should not exceed 56MHz Hz. In total, it contains 1 elements. There is a consumption of 8μAof quiescent energy. There have been 20 terminations. It is a member of the 74HCT7273 family. It is powered by a voltage of 5V . JK flip flop input capacitance is 3.5pF farads. In this case, the D flip flop belongs to the HCTfamily. There is a base part number FF/Latchesfor the RS flip flops. The maximal supply voltage (Vsup) reaches 5.5V. Normal operation requires a supply voltage (Vsup) above 4.5V. There are 5V power supplies attached to it.

74HCT7273N,112 Features

Tube package
74HCT series
5V power supplies

74HCT7273N,112 Applications

There are a lot of NXP USA Inc. 74HCT7273N,112 Flip Flops applications.

• Frequency Dividers
• ATE
• ESD performance
• Control circuits
• Reduced system switching noise
• Registers
• Guaranteed simultaneous switching noise level
• Frequency division
• QML qualified product
• 2 – Bit synchronous counter