MC9S08DZ60AMLC Description
The MC9S08DZ60AMLC is an 8-bit embedded CAN microcontroller that runs at a maximum frequency of 40MHz. It is based on an improved HCS08 CPU with a 20MHz bus. The MC9S08DZ60AMLCi includes a 24-channel 12-bit A/D converter, an analog comparator, a can, 60kB internal flash, 4kB internal RAM, and 54 general-purpose I/O pins. Along with peripherals, the MC9S08DZ60AMLC includes two serial communications interface (SCI) modules, a real-time counter, and a multi-scalable controller area networks (MSCAN) CAN 2.0 A/B software compatible module, one inter-integrated circuit (IIC) bus module, which can function at up to 100kbps (RTC).
MC9S08DZ60AMLC Features
Two very low-power stop modes
Reduced power wait mode
HC08 Instruction set with added BGND instruction
Support for up to 32 Interrupt/reset sources
Very low power real-time interrupt for use in the run, wait and stop
Loop-control Pierce oscillator (XOSC)
Multi-purpose clock generator (MCG)
Watchdog computer operating properly (COP) reset
Low-voltage detection with reset or interrupt - selectable trip points
Illegal opcode detection with reset
Illegal address detection with reset
Flash block protect
Loss-of-lock protection
Single-wire background debug interface
On-chip, in-circuit emulation (ICE) with real-time bus capture
MSCAN - CAN protocol version 2.0 A, B
Two SCIs supporting LIN 2.0 protocol and SAE J2602 protocols
24 Interrupt pins with selectable polarity on each pin
Hysteresis and configurable pull device on all input pins
Configurable slew rate and drive strength on all output pins
MC9S08DZ60AMLC Applications
There are a lot of NXP USA Inc. MC9S08DZ60AMLC Microcontroller applications. MC9S08DZ60AMLC MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
